Safecoat Safe Seal is a multi-use, waterbased, low-gloss sealer for highly porous surfaces such as particle board, plywood, processed wood, and porous concrete. Used primarily to reduce toxic outgassing; in particular, it is highly effective at sealing in formaldehyde outgassing from processed wood such as plywood, particle board, and pressed wood. Safecoat Safe Seal is virtually odorless on application and odorless once cured.

Use on porous surfaces such as processed wood products, concrete, wood, new drywall, grout, and plaster. If used as a grout sealer wipe excess off tile with a damp cloth or sponge while still wet. Test surfaces first in inconspicuous areas to be sure product absorbs into surfaces completely. Excellent at controlling formaldehyde emissions of open faced and faced fiberglass batt insulation - simply fog spray surfaces.

FEATURES

• Highly effective at sealing in offgassing of substrate
• LEED qualified
• Contains no Formaldehyde preservative
• Low VOC content 64 grams/liter (measured without water)

AFM Clear Wood Finish Usage Guide

• Safe Seal - 64 g/l VOC sealer that is primarily used as undercoat or on surfaces that receive no contact
• Hard Seal - 100 g/l VOC sealer and gloss finish for surfaces that receive light contact such as fixtures or bookshelves
• Acrylaq - 247 g/l VOC sealer and finish for surfaces that receive medium traffic such as cabinets, furniture, and doors
• Polyureseal BP - 275 g/l VOC finish for surfaces that receive high traffic such as floors, countertops, railings, and furniture